
Natural Asphaltite (Gilsonite)
Applications
Natural asphaltite (gilsonite) lumps for these industries. Tell us your use and the grade you need.
Road & asphalt modification
Natural asphaltite (gilsonite) is one of the longest-established natural asphalt modifiers in road construction. Blended into petroleum bitumen, this hard, high-softening-point natural bitumen stiffens the binder and makes the pavement less sensitive to heat, helping roads resist rutting and deformation under heavy traffic. Gilsonite-modified asphalt is used in road building in countries including China, India and Iran.
Discuss your applicationRead moreShow less
How gilsonite modifies bitumen
Gilsonite is a solid hydrocarbon resin that is compatible with bitumen. Added to a softer base binder, it raises the softening point and stiffness of the blend and lowers its temperature susceptibility, so the pavement stays firm in summer heat. Its strong bond with aggregate also helps the mix resist water stripping. This makes it a practical asphalt modifier for highways, heavy-duty pavements, intersections, bus lanes and roads in hot climates.
Wet and dry addition
Gilsonite can be blended into the hot binder before mixing (wet process) or added together with the aggregate at the hot-mix plant (dry process), which usually needs no extra equipment. Gilsonite-modified binders are also used in mixes containing reclaimed asphalt pavement (RAP) and in pavement sealers. The right dosage depends on the base bitumen, climate, traffic and mix design, and is set by laboratory testing for each project.
Gilsonite, rock asphalt and lake asphalt
Gilsonite, Buton rock asphalt and Trinidad lake asphalt are all natural asphalts used to modify road binders. Rock asphalt and lake asphalt carry a large share of mineral matter, while gilsonite is a much purer hydrocarbon, so less material has to be shipped and handled for the same bitumen content.
Our gilsonite for road projects
We supply Iranian gilsonite lumps direct from the mine in Western Iran, in three grades by ash content: Standard, Low-ash and Premium. The Standard grade has a softening point of 170–220 °C. Lumps are crushed or ground to the size your plant needs before use. Packed in 1-MT jumbo bags, FOB Bandar Abbas; COA on request.
Waterproofing & roofing
Gilsonite was first sold commercially as a waterproofing compound in the 1880s, and natural asphaltite is still a valued raw material for waterproofing and roofing bitumen. Blended into bitumen for roofing membranes, waterproof coatings and mastics, it raises the softening point and hardness of the compound, so products resist flowing and softening on hot roofs and stay durable outdoors.
Discuss your applicationRead moreShow less
Where it is used
Typical uses include modified bitumen for roofing and waterproofing membranes, roof coatings and sealants, below-grade foundation waterproofing, pipe and tank coatings, and asphaltic mastics and crack fillers. In each case gilsonite works as a hard natural resin inside the bitumen, helping the product keep its shape at high temperature.
Why manufacturers add it
Compared with using a harder grade of petroleum bitumen alone, a gilsonite blend lets formulators raise the softening point while keeping good adhesion to the substrate. Gilsonite is naturally resistant to water and many chemicals, and in pavement sealers it acts as a natural antioxidant that helps the coating stay black longer.
Choosing a grade
Ash is mineral matter that does not dissolve into the bitumen, so the right grade depends on the product. Our Low-ash (ash < 10%) and Premium (ash < 5%) grades suit formulations where insoluble content must be kept low; the Standard grade (ash median 13%) is the cost-effective choice where some filler is acceptable. Tell us your formulation and we can discuss the grade that fits; COA on request.
Oilfield drilling fluids
In oil and gas drilling, gilsonite is a widely used drilling mud additive for shale stabilization and fluid-loss control. Ground gilsonite softens at downhole temperature and seals micro-fractures and pore throats in shale and permeable sands. This cuts filtrate invasion, builds a thin, low-permeability filter cake and helps keep the wellbore stable, including in high-temperature, high-pressure (HTHP) wells.
Discuss your applicationRead moreShow less
How it works in the mud
Gilsonite acts as both a solid and a deformable plugging agent. As the particles reach formation temperature they become malleable and smear across the borehole wall, forming a continuous seal over micro-fractures. This reduces pore-pressure transmission into reactive shales, which helps prevent sloughing and hole collapse, and lowers the risk of lost circulation and differential sticking.
Oil-based and water-based muds
Gilsonite disperses well in oil-based and synthetic-based muds, where it is a standard HTHP fluid-loss additive. In water-based muds it is used with surfactants or as a specially treated product, and it is often compared with sulfonated asphalt and oxidized asphalt as a shale stabilizer. Products with a higher softening point are chosen for hotter wells.
Raw material for drilling-grade gilsonite
Drilling-fluid additive producers grind gilsonite lumps to fine powder and set their own particle-size, ash and softening-point specifications. We supply run-of-mine lumps in Standard, Low-ash and Premium grades as raw material for that processing. The Standard grade has a softening point of 170–220 °C and moisture below 3%; COA on request.
Foundry & carbon additive
In iron foundries, gilsonite is used as a carbon additive in green sand, as a partial or full replacement for sea coal (coal dust). When molten metal is poured, gilsonite creates a reducing atmosphere and deposits lustrous carbon at the mold–metal interface. This helps the casting release cleanly from the sand and improves surface finish.
Discuss your applicationRead moreShow less
Why foundries use it
Gilsonite gives off more gas than sea coal when heated. The lustrous carbon film it forms reduces metal penetration and sand burn-on, and the reducing atmosphere limits reactions between the mold and the casting. The result is fewer surface defects and less cleaning work on the finished casting.
Other foundry uses
Gilsonite is also used in core and mold coatings and as a carbon source in foundry blends. As a natural hydrocarbon with high carbon content, it serves as a carbon additive where a clean, easily dispersed carbon carrier is needed.
Grade and form
Foundries grind the lumps into fine powder before blending with sand. Ash builds up as inert fines in the sand system, so lower-ash grades are usually preferred for high-value castings, and the Standard grade suits less demanding work. We supply Standard, Low-ash (ash < 10%) and Premium (ash < 5%) lumps; COA on request.
Paint & ink
Gilsonite has a long history in inks and coatings: it was a main component of the “japan black” lacquer on the Ford Model T. Today natural asphaltite is used in dark printing inks, where it acts as a resin binder and helps disperse carbon black, and in black and anticorrosive paints, underbody coatings, pipe coatings and wood stains.
Discuss your applicationRead moreShow less
In printing ink
In black printing inks such as news inks, gilsonite is dissolved in the oil or solvent vehicle and works as a low-cost resin. It helps wet and disperse carbon black, deepens the black tone and improves gloss and binding on paper.
In paints and coatings
In paints, gilsonite gives a strong bond to metal and other substrates and good water resistance, which is why it is used in anticorrosive paints, underbody coatings, pipe coatings and asphaltic paints. In wood stains it acts as both binder and transparent pigment, giving a deep, fade-resistant brown colour.
Grade requirements
Inks and coatings are sensitive to insoluble matter, so formulators usually choose the lowest-ash material and check solubility in their own vehicle. Our Premium grade has ash below 5% and our Low-ash grade below 10%. If you make inks or paints, contact us to discuss your requirement; COA on request.
Contact us
WeChat is our main channel. You can also reach us by email or WhatsApp.
Tell us the grade, quantity and destination port.
- WeChat ID
- amir_exportCopy WeChat ID
